Table of Contents
Advertisement
12
www.aeg.com
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate (the
heat setting display shows
To activate the function: touch
Touch
or
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect
on the operation of the
cooking zones.
5.10 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
5.11 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.12 The Child Safety Device
This function prevents an accidental
operation of the hob.
).
.
of the timer to set the
.
.
.
To activate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
5.13 Power management
function
• All cooking zones are connected as
on the illustration.
• The hob and both ovens are
connected to one phase.
• The phase has a maximum electricity
load.
• The function divides the power within
.
the appliance. The oven is more
important than the hob.
• The function activates when the total
electricity load in the appliance is
exceeded.
• The function decreases the power on
the cooking zones to prevent a circuit
overload.
• The heat setting display of the
reduced zones changes between two
levels.
.
comes on.
.
comes on.
.
.
for 4 seconds.
the function
Advertisement
Table of Contents
