Firmware Update Over The Network; Up- And Download - W&T IP-Watcher 2x2 Digital PoE Manual

W&T
Before downloading, please write down the 5-digit model
number found on the IP-Watcher. From our Web site you can
get to the product overview sorted by article numbers, through
which you can get directly to the data sheet for the device. Here
you follow the link to the current version of the firmware.

8.4.2 Firmware update over the network

Required is a PC running Windows 9x/NT/2000/XP/Vista with a
network connection and activated TCP/IP stack. For the update
process you need two files, which as already mentioned are
available for downloading from our homepage:
. The executable update tool for sending the firmware to the
IP-Watcher
. The file with the new firmware to be sent to the IP-Watcher
No special preparation of the IP-Watcher is necessary for the
update.
The WuTility tool used for the update detects all the W&T
devices located in your network and is for the most part self-
explanatory. If you do have questions or anything is unclear,
please use the associated documentation or the online help.
Never intentionally interrupt the update process by
1
disconnecting the power supply. The IP-Watcher will be
rendered non-functional after an incomplete update.
Never mix files having different version numbers in the name.
This will result in non-functionality of the device.
The IP-Watcher automatically detects when transmission of the
operating software is complete and then carries out a reset.

8.5 Up- and download

Under the heading UpDolwnload, which can also be reached
from the configuration menu, you can up- and download the
device configuration:
IP-Watcher 2x2 Digital PoE
77