Hiding And Showing The Configuration Menu - W&T IP-Watcher 2x2 Digital PoE Manual

W&T
IP-Watcher 2x2 Digital PoE
If the configuration menu was used to set an artificial trigger
for an alarm to generate the messages for the alarm, the word
Test flashes in the alarm overview. If an alarm is in this state,
the set trigger must be first rescinded from the configuration
page before the device can again trigger alarms based on an
actual input condition.

3.4 Hiding and showing the configuration menu

If the configuration menu is not visible, the pages
. Home (home.htm)
. User (user.htm)
in the upper left corner provide the link Show menu for making
the menu tree visible.
Link for showing the configuration menu
In addition to the link for showing the configuration menu, the
pages listed above also provide links for opening the other
control page.
30