W&T IP-Watcher 2x2 Digital PoE Manual page 41

W&T
. Re-Trigger ON message: If the alarm is still present because
it has not yet been acknowledged but the trigger has already
been cleared and then tripped again, this message is sent.
. Trigger OFF message: This message is sent when the trigger
is cleared.
. Alarm ACK message: This message is sent when the alarm
is acknowledged.
The various messages are configured on the sub-pages of the
individual alarms, for example:
Config >> Device >> Alarm >> Alarm 1 >> Mail
There you select the alarms you want to be sent in the Enable
Text block.
Selecting the possible messages for an alarm
In the fields Subject and Alarm Text you enter the subject and
the message text which you want sent for Alarm ON message
and Re-Trigger ON message.
The fields Alarm Ack Subject and Alarm Ack Text contain the
subject and message text for the message which is sent
directly after acknowledging an alarm.
For Trigger OFF Subject and Trigger OFF Text you enter the
subject line and message text you want sent when the trigger
is cleared.
IP-Watcher 2x2 Digital PoE
41