W&T IP-Watcher 2x2 Digital PoE Manual page 45

W&T
IP-Watcher 2x2 Digital PoE
E-mail configuration
Here you set the following parameters:
In the Name field enter the name you want to appear as the e-
mail sender.
ReplyAddr represents the address the device uses to identify
itself.
In the next step (MailServer) set the IP address of your mail
server or its host name (for configured DNS servers only) you
want the device to use. If the e-mail port is not the standard
port 25, you can append the port to the addressusing a colon:
mail.provider.de:<Port>
45