Siemens SIMATIC ET 200SP Manual page 6

Preface
Product compatibility
The following table describes compatibility between manual edition, device revision,
engineering system and the engineering system.
Manual edition Comments
09/2018
09/2017
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines, and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines and
networks. Systems, machines and components should only be connected to the enterprise
network or the internet if and to the extent necessary and with appropriate security measures
(e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into
account. For more information about industrial security, please visit:
http://www.siemens.com/industrialsecurity.
Siemens' products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends to apply product updates as soon as available and to always
use the latest product versions. Use of product versions that are no longer supported, and
failure to apply latest updates may increase customer's exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
http://www.siemens.com/industrialsecurity.
4
Device revision
- FW: 1.0.0 or higher
Initial release FW: 1.0.0 or higher
Analog input module AI 2xSG 4-/6-wire HS (7MH4134-6LB00-0DA0)
Engineering system
STEP 7 TIA Portal V14 SP1 or higher
STEP 7 V5.6 or higher
STEP 7 TIA Portal V14 SP1 or higher
STEP 7 V5.6 or higher
Manual, 09/2018, A5E41867508A-AB