Advertisement
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Description #1 Torx screwdriver
Description #2 Static electric tweezers
Description #3 Phillips screwdriver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1. Use Phillips screwdriver to remove the 2 screws on the
2. Use T9 screwdriver to remove the 4 screws on the chassis.
3. Will the unit,open the top cover with 90 angle from USB side.Use static electric tweezers to
remove the antenna cable from the PCBA.
4. Remove the top cover,use PH2 Phillips screwdriver to remove 3 screws on the
beam and PCBA.
5. Remove the PCBA and LED guide beam from the chassis.
MNT
bracket.
Tool Size (if
applicable)
T9
NA
PH2
LED guide
Advertisement
