Sony Ericsson Z600 Working Instruction, Sp/Mechanical page 3

Hide thumbs Also See for Z600:
Table of Contents

Advertisement

#
Figure
3
4
5
3/000 21-1/FEA 209 544/80 C
Sony Ericsson Mobile Communications AB
Fig.1.3
Fig.1.4
Fig.1.5
Instruction
Remove the four lower rear
cabinet screws.
(Fig.1.3)
Open the phone with the
opening tool (NTZ 112 302/2)
Begin as the picture shows.
Then gently move the tool
along the gap both ways until
the front is loose on this side.
If necessary do the same thing
on the other side.
(Fig.1.4)
Open the lower rear cabinet
cautiously.
(Fig.1.5)
Working Instruction, SP/Mechanical
Note
Removed screws cannot be
reused and must be
scrapped.
Use 15 Ncm of torque for
the screws
Be careful not to scratch
the phone with the opening
tool.
3(41)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z608

Table of Contents