Table of Contents
Advertisement
3.22 Camera holder
Tools
•
Torque screwdriver, set to 15Ncm ± 6 %. Bits NTZ 112 1052
•
Opening tool NTZ 112 302/2
•
Blunt pair of tweezers
Instruction
•
Disassemble the phone as described in 1 Disassembly Upper & Lower cabinets, step 12-16.
#
Figure
1
•
Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 16, 18-22.
3/000 21-1/FEA 209 544/80 C
Sony Ericsson Mobile Communications AB
Fig.3.35
Instruction
1. Remove the old camera
holder with a blunt pair of
tweezers and replace it with a
new one.
3. The camera holder rubber
edge should be in level with
the antenna/LCD PBA when
properly assembled.
(Fig.3.35)
Working Instruction, SP/Mechanical
Note
In some earlier versions
the camera holder rubber
could be forced/jammed
under the antenna/LCD
PBA – If so, lossen/remove
the screw. See picture 3.35
number 2.
Removed screws cannot be
reused and must be
scrapped.
Use 10 Ncm of torque for
the screw.
32(41)
Advertisement
Table of Contents
