Advertisement
Owner's Manual
IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING
THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION.
At the beginning of each play season
•
Tighten all hardware.
•
Lubricate all metallic moving parts per manufacturer's
instructions.
•
Check all protective coverings on bolts, pipes, edges,
and corners. Replace if they are loose, cracked, or
missing.
•
Check all moving parts including swing seats,
ropes, cables, and chains for wear, rust, or other
deterioration. Replace as needed.
•
Check metal parts for rust. If found, sand and
repaint using a non lead-based paint meeting the
requirements of 16 CFR 1303.
•
Check all wood members for deterioration
and splinters. Sand down splinters and replace
deteriorating wood members.
•
Reinstall any plastic parts, such as swing seats or any
other items that were removed for the cold season.
•
Rake and check depth of loose fi ll protective surfacing
materials to prevent compaction and to maintain
appropriate depth. Replace as necessary.
Twice a month during play season
•
Tighten all hardware.
•
Check all protective coverings on bolts, pipes, edges, &
corners. Replace if they are loose, cracked, or missing.
•
Rake and check depth of loose fi ll protective surfacing
materials to prevent compaction and to maintain
appropriate depth. Replace as necessary.
Once a month during play season.
•
Lubricate all metallic moving parts per manufacturer's
instructions.
•
Check all moving parts including swing seats,
ropes, cables, and chains for wear, rust, or other
deterioration. Replace as needed.
At the end of each season or when
the temperature drops below 32° F
•
Remove plastic swing seats and other items as specifi ed by
the manufacturer and take indoors or do not use.
•
Rake and check depth of loose fi ll protective surfacing
materials to prevent compaction and to maintain
appropriate depth. Replace as necessary.
OWNERS SHALL BE RESPONSIBLE FOR MAINTAINING THE LEGIBILITY OF THE WARNING LABELS
Instructions for Proper Maintenance
Additional Maintenance
•
Check the swing beam and hardware every two
weeks due to wood expansion and contraction. It is
particularly important that this procedure be followed
at the beginning of each season.
•
Inspect wood parts monthly. Th e grain of the wood
sometimes will lift in the dry season causing splinters
to appear. Light sand may be necessary to maintain a
safe playing environment. Treat your playset with stain
regularly, to help prevent severe checking/splitting and
other weather damage.
•
A waterborne transparent stain has been applied to
your playset. Th is is done for color only. Once or twice
a year, depending on your climate conditions, you must
apply some type of protection (sealant) to the wood
of your unit. Prior to the application of sealant, lightly
sand any "rough" spots on your playset. Please note this
is a requirement of your warranty.
•
Assembling and maintaining the playset on a level
location is very important. As your children play, your
playset will slowly dig its way into the soil, and it is very
important that it settles evenly. Make sure the playset is
level and true one each year or at the beginning of each
play season.
Disposal Instructions
When the Playcenter use is no longer
desired, it should be disassembled
and disposed of in such a way that no
unreasonable hazards will exist at the
time the unit is discarded.
Third Party Assembly
•
Customer may, in their sole discretion, elect to use a
third party person or service to assemble this product.
Backyard Discovery assumes no responsibility or
liability for any charge incurred by the Customer for
any assembly services' . Please see our warranty for
more information about damaged and missing part
replacement coverage. Backyard Discovery will not
reimburse Customer for the price of parts purchased
•
Modifi cations made by the consumer to the original
activity toy shall be carried out according to the
instructions of the manufacturer. In particular, instruc-
tions shall be provided with kit/accessory about the
installation of rope/nets concerning the minimum
diameter, the need for fi xation ends, overall length,
and positioning in relation to other at both structures.
8
Advertisement
