White Rodgers 1F95-80 Operation Manual page 38

a flashing BATTERY on the display, the
installed battery may be dead. If you re-
move the old battery and install a fresh
battery within one minute, you may not lose
your programming. After installing a new
battery, follow the procedures in CHECK
YOUR PROGRAMMING to determine
whether your programming was main-
tained. If the thermostat retains program-
38
SYSTEM
ming, press
SWITCH
put the thermostat back on the wall, press
SYSTEM
to select the operating mode you
SWITCH
want, then press
PRGM
operation. If the program is lost, you must
reprogram the thermostat. See PRO-
GRAMMING YOUR THERMOSTAT.
until OFF is displayed,
RUN to start program