White Rodgers 1F95-80 Operation Manual page 23

SET
5. Press once. The display will show
CLOCK
the day of the week as an abbreviation (MO
for Monday, TU for Tuesday, etc.).
6. Press and hold either
reach the correct day of the week.
RUN
7. Press once. The display will show the
PRGM
correct time and room temperature alter-
nately.
Program Heating and Cooling
Temperatures
During programming, if you don't press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume
TIME or until you
TIME
FWD
BACK
programming after this happens, press
until you are at the point where you stopped
programming. Then you may continue to enter
your programs normally. If you want to stop
programming at any time, simply press
resume program operation.
SYSTEM
1. Press until HEAT is displayed.
SWITCH
VIEW
2. Press once. The display will continue
TEMP
to show HEAT. Beside HEAT is the letter
O, representing the occupied heating tem-
perature (HEAT O). At the right of the
display is the currently programmed HEAT
O setting.
3. Press either
temperature to your selected HEAT O set-
ting.
VIEW
PRGM
RUN
PRGM
or to change the
to
23