Energy Saving Tips; First Time Use - Whirlpool W55VM 1100 W Instructions For Use Manual

DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured with recyclable or
reusable materials.
Dispose of it in accordance with local waste
disposal regulations. For further information
on the treatment, recovery and recycling of
household electrical appliances, contact your local
authority, the collection service for household
waste or the store where you purchased the
appliance. This appliance is marked in compliance
with European Directive 2012/19/EU, Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly,
you will help prevent negative consequences for
the environment and human health.
The symbol on the product or on the
accompanying documentation indicates that it
should not be treated as domestic waste but must
be taken to an appropriate collection centre for the
recycling of electrical and electronic equipment.

ENERGY SAVING TIPS

Install the appliance in a dry, well ventilated room
far away from any heat source (eg. radiator,
cooker, etc.) and in a place not exposed directly to
the sun. If required, use an insulating plate.
To guarantee adequate ventilation follow
installation instructions.
Insufficient ventilation at the back of the product
increases energy consumption and decreases
cooling efficiency.
Frequent door opening might cause an increase
in Energy Consumption.

FIRST TIME USE

• Wait at least two hours, after the installation, before connecting the appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat knob to switch on the appliance.
After turning the appliance on, you must wait for 4-6 hours for the correct storage temperature to be
reached for a normally filled appliance.
• Your fridge may have a smell when it is operated for the first time. This is normal and the smell will
fade away when your fridge starts to cool.
The internal temperature of the appliance and the
Energy Consumption may be affected also by the
ambient temperature, as well as location of the
appliance. Temperature setting should take into
consideration these factors. Reduce door opening
to minimum.
When thawing frozen food, place it in the
refrigerator. The low temperature of the frozen
products cools the food in the refrigerator.
Allow warm food and drinks to cool down before
placing in the appliance.
Positioning of the shelves in the refrigerator has
no impact on the efficient usage of energy. Food
should be placed on the shelves in such way to
ensure proper air circulation (food should not
touch each other and distance between food and
rear wall should be kept).
You can increase storage capacity of frozen food
by removing baskets and, if present, Stop Frost
shelf.
Do not worry about noises coming from the
compressor which are normal operation noises.
EN - 44