Usage Information; Thermostat Setting; Temperature Settings Warnings - Whirlpool W55VM 1100 W Instructions For Use Manual

Table-top refrigerator
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 40

USAGE INFORMATION

Thermostat setting

Thermostat automatically regulates the inside temperature of the refrigerator compartment and freezer
compartment. By rotating the knob from position 1. to 5., colder temperatures can be obtained.
Important note: Do not try to rotate knob beyond 1 position it will
stop your appliance.
For short-term storage of food in the freezer/refrigerator
compartment, you can set the knob between minimum and
medium position.(1-3)
For long-term storage of food, you can set knob to medium position.(3-4)
Note that; the ambient temperature, temperature of the freshly stored food and how often the
door is opened, affects the temperature in the refrigerator compartment. If required,change the
temperature setting.
The freezer**** of the refrigerator can cool up to -18°C and more.
If super switch is available:
Normally set this switch to '0' position. Except when the ambient temperature
is low like in winter. (ie.below 16°C) or when the freezer temperature needs
to be maintained lower. In that case, turn the switch to '1' position ON.
To set super switch ON that is on the thermostat box, press the switch down to '1' position. The
switch will lit.
When the freezer compartment is cooled down to sufficient temperature, or the weather gets hot,
turn the super switch off to save electrical consumption.
When you first switch on the appliance, for starting a suitable cooling, the appliance should work 24
hours continuously until it cools down to sufficient temperature.
In this time do not open the door so often and place a lot of food inside the appliance.
If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting or
re-plugged the unit in order not to damage the compressor.
Super freezing: If ambient temperature is more than 16°C, this switch must be used as superfreeze
switch.For maximum freezing capacity, the switch must be turned on 3 hours before placing fresh foods.
After placing fresh food in the freezer, 24 hours ON position is generally sufficient. In order to save
energy, please turn off this switch after 24 hours from placing fresh food.

Temperature Settings Warnings

It is not recommended that you operate your fridge in environments colder than 10°C in terms of its
efficiency.
When setting the thermostat, take into consideration how often the appliance door is opened and
closed, how much food is stored in the refrigerator, and the environment in which the refrigerator is
located.
When the appliance is first switched on, allow it to run for 24 hours in order to reach large quantity of
food inside. operating temperature. During this time, do not open the door and do not keep a large
quantity of food inside.
Unplug your appliance during a power cut to prevent damage to the compressor. Once power is
restored, delay plugging in your appliance for 5 to 10 minutes. This will help prevent damage to the
appliance's components.
Your appliance is designed to operate in the ambient temperature ranges stated in the standards,
according to the climate class stated in the information label. It is not recommended that your fridge
is operated in the environments which are outside of the stated temperature ranges. This will reduce
the cooling efficiency of the appliance.
This appliance is designed for use at an ambient
temperature within the 16°C - 32°C range.
Climatic Class
EN - 45
Amb. T. (°C)
SN:
From 10 to 32 °C
ST:
From 16 to 38 °C;
N:
From 16 to 32 °C
T:
From 16 to 43 °C

Advertisement

Table of Contents
loading

Table of Contents