Transportation And Changing Of Installation Position; Repositioning The Door; Before Calling Service - Whirlpool W55VM 1100 W Instructions For Use Manual

Table-top refrigerator
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 40
Replacing The Light Bulb
When replacing the light of the refrigerator compartment;
1.
Unplug the unit from the power supply,
2.
Press the hooks on the sides of the light cover top and
remove the light cover
3.
Replace with a bulb of maximum 15 Watts.
4.
Install the cover.
5.
Wait for 5 minutes before re-plugging and bring the
thermostat to its original position.
Replacing LED Lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by authorized
personnel only.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
The original packages and foamed polystyrene (PS) can be retained if required.
During transportation, the appliance should be secured with a wide string or a strong rope. The
instructions written on the corrugated box must be followed while transporting.
Before transporting or changing the installation position, all the moving objects (ie,shelves,crisper...)
should be taken out or fixed with bands in order to prevent them from getting damaged.
Carry your fridge in the upright position.

Repositioning the door

It is not possible to change the opening direction of your fridge door, if the door handles on your
fridge are installed from the front surface of the door.
It is possible to change the opening direction of the door on models without any handles.
If the door opening direction of your fridge may be changed, you should contact the nearest
Authorised Service to have the opening direction changed.

BEFORE CALLING SERVICE

If your refrigerator is not operating as expected, check the solutions listed below before calling an
electrician or the after sales service.
What to do if your refrigerator does not operate:
Check that :
• There is no power,
• The general switch in your home is not disconnected ,
• The thermostat setting is in the on « • » position,
• The socket is no longer functioning. To check this, plug in an appliance that you know is working
into the same socket.
What to do if your refrigerator performs poorly:
Check that:
• You have not overloaded the appliance,
• The doors are fully closed,
• There is no dust on the condenser,
• There is enough space for air circulation at the rear and side of the appliance.
EN - 49

Advertisement

Table of Contents
loading

Table of Contents