Clearing The Pairing List Of The Headset (Reset); Clearing The Pairing List Of The Dongle (Reset) - Sennheiser EPOS ADAPT 460 User Manual

27 If a problem occurs ...

Clearing the pairing list of the headset (Reset)

1
Make sure that the headset is turned off
X
(see page 12).
Press and hold the Power button until the LED flashes
X
blue and red.

Clearing the pairing list of the dongle (Reset)

1
3s
Plug the dongle into the USB port of your computer.
X
Press and hold the button until the LED flashes blue
X
and red.
ADAPT 460 | ADAPT 460T
4s
In-Ear Wireless office headset
2
Simultaneously press the multifunction button and the
X
Power button. >>Found in MMI: inserting USB cable +
Hold (2 sec) Power button at the same time > How does
it work finally? Tina: update illustration >>KG: power +
music button for 4s > 3x purple
The LED flashes purple or blue?
is cleared. The headset searches for Bluetooth devices
to pair with (see page 8).
2
2x
Double press the dongle's button.
X
The LED flashes purple 3 times. The pairing list is
cleared. The dongle searches for Bluetooth devices to
pair with (see page 8).
3x
4s
3 times. The pairing list
3x