Page 1
5 Drawer Narrow Chest Assembly Instructions 003 xx 9405 - Please keep for future reference Dimensions Width - 34.3cm Depth - 33.0cm Height - 91.2cm MADE IN GREAT BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.
Page 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the We do not the product, this could cause components and tools listed on recommend the damage.
Page 3
Components - Panels Please check you have all the panels listed below Important - Thick lines indicate finished edges 622xx7002 x5 Left drawer side (30x10cm) 5534 (34.3X33.0cm) 623xx7002 x5 9422 Right drawer side Plinth (30x10cm) (30.9x7.6cm) 0278 0279 Left End Panel Right End Panel (89.7x32.8m) (89.7x32.8cm)
Page 4
If you have damaged or missing components, call the Components - Fittings Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline. Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
Page 6
Assembly Instructions Step 1 Fitting dowels to top panel. Insert 4 metal dowels into the top panel 5534 Note: Tighten metal 5534 dowels up fully against the panel. Do not over-tighten. Step 2 Fitting cams to the bottom and plinth. Insert 4 cams into the plinth panel...
Page 7
Assembly Instructions Step 4 Front of Runner Attaching runners to the end panels. 0278 Position the runner so that the second hole from the front of the runner lines up with the pre-drilled hole nearest to the edge of the panel. Use screws to secure the runner.
Page 8
Assembly Instructions Left hand side Drawer Back Insert wooden dowels 622xx7002 624xx7003 in drawer back 624xx7003 into holes in left 622xx7002 right hand 623xx7002 drawer sides. Right hand side 623xx7002 Sit drawer bottom into grooves on the drawer front. Ensure foil on the drawer bottom is facing upwards.
Page 9
Assembly Instructions Step 6 Connect left end to 0278 the plinth and bottom panel. Connect the dowels in the left end 0278 to the cams in the plinth panel 9422 and bottom panel 0274 Turn cam 180 degrees to lock. 0274 Ensure plinth is Ensure plinth sits...
Page 10
Assembly Instructions Step 9 Squaring up the unit. DIAG 2 DIAG 1 DIAG 3 IMPORTANT! Ensure a tape measure is used to square unit up. Before securing the back it is necessary to square up the unit. You can do this by measuring between XX - XX and YY - YY ensuring these are the...
Page 11
Assembly Instructions Step 11 Fit the drawer. Stand the unit up. For this step we recommend you follow 2nd Hole the helpful hints below. Step 12 Fit the drawer helpful hints. PULL SLIDING PART OF DRAWER RUNNERS LOCATE DRAWER ONTO RUNNERS OUT SO THEY ARE FULLY EXTENDED.
Page 12
Assembly Instructions Step 13 WARNING Fixing to wall IN ORDER TO PREVENT OVERTURNING We recommend that this THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE unit is fixed to a suitable PROVIDED wall to prevent possible Serious or fatal crushing injuries can occur from overbalancing.
Page 13
Assembly Instructions Congratulations! Your unit is complete. Important Information If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 8am - 4.30pm (Monday to Thursday) 8am - 2.30pm (Fridays) (by contacting the customer service line your statutory rights are not affected) Please have the following information to hand: >>...
Need help?
Do you have a question about the YL069EM and is the answer not in the manual?
Questions and answers