Components - Panels Please check you have all the panels listed below 1 x1 2 x1 3 x1 4 x1 5 x1 6 x1 7 x1 13 x1 8 x1 9 x1 10 x1 11 x1 12 x2 Components - Fittings Note: may be supplied than are required.
Page 4
Assembly Instructions Step 1 1. Insert 4 x Male Camlocks A into Shelf Front 3 and Base front 4 2. Insert 4 x Dowels C into ends of Parts 3 and 3. Connect Front 3 Shelf 4 and Connect Front 6 to Base Panel 4.
Page 5
Assembly Instructions Step 5 1. Connect Left Side Panel 8 to Shelf and base panel 7 2. Insert 4 x female camlocks tighten with a suitable screwdriver Note: For further details, please see the “using camlock s” section at the front of this instru ction Step 6 1.
Page 6
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the • During assembly do not stand • We do not components and tools listed on or put weight on the product, recommend the use page 2 this could cause damage.
Page 7
Assembly Instructions Step 8 1. Connect 1 x Handle E to door 9 using 1 x Screw F. 2. Connect 2 x Hinges G to Door 9 using 4 x Screws H , 2 screws per hinge. 3. Connect the door to the unit using 8 x Screw , 4 screws per hinge.