Table of Contents
Advertisement
Install the brake disc and then tighten the bolts
(disc brake).
Torque value: 2.4~3.0kgf-m
Lubricate the speedometer gear with grease and
install the gear into the wheel hub.
Align the flange part on the speedometer gear with
the slot of wheel hub.
Caution
Contaminated brake lining will reduce brake
performance so the brake lining, brake drum
and disc must be free of grease.
Apply with grease onto the left side dust seal.
Install the left side collar.
Place the front wheel between the front cushions.
Caution
Align the front cushion groove with the
speedometer gear box stopper flange.
Insert the wheel axle into the wheel, and then
install the wheel axle nut.
Tighten the nut to specified torque.
Torque value: 5.0~7.0kgf-m
Connect the speedometer cable to the
speedometer gear box.
13. Steering / Front Wheel / Front Cushion
5 bolts
Front cushion groove
Shaft nut
Stopper
Speedometer cable
13-7
Hide quick links:
Advertisement
Table of Contents
