Starting Motor Removal; Starting Motor Installation; Meter - Sym JET 4 R 50 Series Service Manual

SYM 16. ELECTRICAL EQUIPMENT

Starting Motor Removal

Bolts x2
Remove the battery cover.
Firstly, remove the battery negative (-) terminal,
and then remove the positive (+) terminal.
Remove the luggage box.
Remove the starting motor power wire.
Remove the starting motor mounting bolts and
motor.

Starting Motor Installation

Install the motor in reverse order of removal.

METER

Removal
Remove the front handle cover.
Meter
Remove the speedometer cable.
speedometer cable
Remove the front cover.
Meter connector
Remove the power connector of the meter.
16-21