Humanware Prodigi Connect 12 Getting Started
Hide thumbs
Also See for Prodigi Connect 12:
- User manual (76 pages) ,
- User manual (68 pages) ,
- User manual (80 pages)
Related Manuals for Humanware Prodigi Connect 12
Summary of Contents for Humanware Prodigi Connect 12
-
Page 3: Getting Started
GETTING STARTED 1. On a flat and stable surface, hold your Prodigi stand in an upright position making sure the panel with the word “PULL” is facing you. While holding the handle with one hand, unfold the “PULL” panel with your other hand until it is flat on the table. - Page 4 3. Hold your tablet with the screen side facing you, making sure the Samsung logo is upside down. Carefully insert your tablet into the slot and slide it forward until you reach the back end of the slot. Lock the front bracket to fasten your tablet onto the folding stand.
- Page 5 4. Connect the USB Recharge Cable to the Power Supply. 5. Carefully connect the cable to the recharge port and plug it to an outlet. The recharge port is located on the left side of the tablet. IMPORTANT: Use caution while inserting the cable into the Recharge Port.
- Page 6 6. Allow the tablet to charge until the battery is full (initial charge is 8 hours). 7. Press and hold the Power button to power on your tablet. Your tablet will take about 30 seconds to initialize. The Samsung logo will appear on the screen (possibly upside down for booting, as the tablet is inserted upside down).
- Page 7 ACCD-0132 REV 02...