Related Manuals for Humanware MATT Connect
Summary of Contents for Humanware MATT Connect
-
Page 3: Getting Started
Getting Started 1. On a flat, stable surface, hold your stand upright, ensuring the panel with the word “MATT Connect” faces toward the back. Hold the handle with one hand and unfold the lower panel with the other hand until it... - Page 4 2. Unfold and lift the top panel until it is roughly parallel with the lower panel. Hold your tablet with the screen facing you, ensuring the HumanWare logo is at the top. Carefully insert the top of your tablet into the slot and slide it forward until you reach the back end of the slot.
- Page 5 you will hear a click indicating that your tablet is locked into position. 4. Connect the power supply cable to the charging port and plug it into an outlet. The charging port is located on the right side of the tablet. Charge the battery to full capacity.
- Page 6 5. Press and hold the power button, located on the bottom edge of the tablet, to power on your tablet. The APH and Android logos will appear on screen. Your tablet will take approximately 45 seconds to initialize. 6. You will be prompted through several setup wizards.
-
Page 8: Customer Support
Customer Support For customer support, please contact the HumanWare office nearest you or view our website at: www.humanware.com North America: 1 (800) 722- 3393 support@humanware.com Europe: (0044) 1993 415 800 ACCD-0312 eu.support@humanware.com Rev 03 Australia / Asia: (02) 9686 2600...