Getting Started 1. On a flat and stable surface, hold your stand upright, making sure the panel with the word “MATT Connect” is facing towards the back. Hold the handle with one hand and unfold the lower panel with your other hand until it is flat on the table.
Page 4
2. Unfold the top panel until it is roughly parallel with the lower panel. 3. Hold your tablet with the screen side facing you, making sure the HumanWare logo is at the top. Carefully insert the top of your tablet into the slot and slide it forward until you reach the back end of the slot.
Page 5
tablet down; you will hear a click indicating that your tablet is fastened. 4. Connect the power supply cable to the recharge port and plug it to an outlet. The recharge port is located on the right side of the tablet. Allow the tablet to recharge until the battery is full.
6. You will now be guided through several setup wizards. IMPORTANT NOTE BEFORE STARTING, visual accessibility settings are available for use before completing the wizards. Please be sure to tap “Vision settings” at the bottom of the screen and make any required adjustments prior to entering the wizard.