Humanware Prodigi Duo Getting Started
Hide thumbs
Also See for Prodigi Duo:
- User manual (56 pages) ,
- Quick reference manual (2 pages) ,
- User manual (44 pages)
Related Manuals for Humanware Prodigi Duo
Summary of Contents for Humanware Prodigi Duo
-
Page 3: Getting Started
GETTING STARTED 1. Pull the Base out of its box by holding the temporary cardboard handle, and place it on a flat and level surface. Page 1... - Page 4 2. Make sure the capture and front panel surface is clean before placing the overlay stickers on your front panel, then carefully place the stickers at their appropriate location based on the images below: Once you have placed the stickers, wait 10 minutes to make sure they are well in place.
- Page 5 3. Connect the Power Supply to the Power Cable. Then, connect the cable to the Power Connector and plug it to an outlet. 4. Position the screen: The center of the screen should be at the same height as your eyes, ideally 16 inches (40 cm) away.
- Page 6 Push the two latches inward to connect the Tablet and power on the Base. Prodigi will take about 1 minute to initialize. HumanWare’s logo will appear on the screen, followed by Prodigi’s startup screen. Note: If the Tablet’s battery is drained, it may take a few minutes of recharge for Prodigi to initialize.
- Page 8 ACCD-0051 REV 06...
Need help?
Do you have a question about the Prodigi Duo and is the answer not in the manual?
Questions and answers