Download Print this page

Siemens FXS2061-O User Manual

Wireless diagnostic too
Hide thumbs

Advertisement

Quick Links

FXS2061-O
Wireless diagnostic tool
User Guide
A6V10425605_b_en_--
2016-12-12
Building Technologies
Control Products and Systems

Advertisement

loading

  Related Manuals for Siemens FXS2061-O

  Summary of Contents for Siemens FXS2061-O

  • Page 1 FXS2061-O Wireless diagnostic tool User Guide Building Technologies A6V10425605_b_en_-- 2016-12-12 Control Products and Systems...
  • Page 2 Issued by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41 724-2424 www.siemens.com/buildingtechnologies Edition: 2016-12-12 Document ID: A6V10425605_b_en_-- © Siemens Switzerland Ltd, 2015 2 | 64 Building Technologies A6V10425605_b_en_-- Fire System 2016-12-12...
  • Page 3: Table Of Contents

    Table of contents About this document ................5 Applicable documents ................. 7 Download center ..................7 Technical terms ..................8 History of changes ..................9 Installation ..................10 System requirements .................10 Installing software ..................11 Starting software ..................14 Exiting software ..................14 Communication with devices ..............15 Connection between device and PC............17 GUI ....................
  • Page 4 Operation ...................39 Pre-settings ....................39 4.1.1 Configuration ................40 4.1.2 Presettings for DSV ..............41 4.1.3 Device ..................42 4.1.4 Firmware package presettings ............ 43 4.1.5 General settings ................44 4.1.6 Help settings ................46 'Discover Gateways...' button ..............46 'Disconnect' button..................
  • Page 5: About This Document

    Applicable documents 1 About this document Goal and purpose This document describes how to configure a radio cell with the 'FXS2061-O Wireless Diagnostic Tool' software. The radio devices are the following: FDM273-O radio manual call point FDM275-O radio manual call point...
  • Page 6 About this document Applicable documents Document identification The document ID is structured as follows: ID code Examples ID_ModificationIndex_Language_COUNTRY A6V10215123_a_de_DE -- = multilingual or international A6V10215123_a_en_-- A6V10315123_a_--_-- Date format The date format in the document corresponds to the recommendation of international standard ISO 8601 (format YYYY-MM-DD). Conventions for text marking Markups Special markups are shown in this document as follows:...
  • Page 7: Applicable Documents

    The display on the screen depends on the PC setting. It may therefore deviate from the images shown. Product security disclaimer Siemens products and solutions provide security functions to ensure the secure operation of building comfort, fire safety, security management and physical security systems. The security functions on these products and solutions are important components of a comprehensive security concept.
  • Page 8: Technical Terms

    Comma-separated values Basic structure of a text file for saving data. Device-specific variant A DSV file contains all the device information to be used by the FXS2061-O Wireless Diagnostic Tool software. Product version Code for unique identification RSSI Received Signal Strength Indication Value for the received field strength of the devices.
  • Page 9: History Of Changes

    About this document History of changes 1.4 History of changes The reference document's version applies to all languages into which the reference document is translated. The first edition of a language version or a country variant may, for example, be version 'd' instead of 'a' if the reference document is already this version.
  • Page 10: Installation

    Installation System requirements 2 Installation 2.1 System requirements Hardware Component Minimum requirements Processor Pentium M1.6 Main memory 512 MB Hard disk 400 MB, better still 1 GB of free memory Network connection Ethernet RJ45 Screen resolution 1024 x 768 Colors 65535 Software Operating system...
  • Page 11: Installing Software

    If you install a version of the software with another major or minor version, new standard installation paths are created. The existing installation paths are retained. If you already have an older version of 'FXS2061-O Wireless Diagnostic Tool' installed, this is uninstalled before the new installation starts. 11 | 64...
  • Page 12 Installation Installing software Installation display Click on 'Next'. To accept the license agreement, click on 'I agree'. To install additional tools, click on the corresponding checkbox. Follow the instructions. To use the FDUZ227 adapter, for example, install the USB driver. 12 | 64 Building Technologies A6V10425605_b_en_--...
  • Page 13 Installation Installing software Installation display To change the target directory, click on 'Browse...'. Specify the target directory. Click on 'Next'. To change the target directory for shared files, click on 'Browse...'. Specify the target directory. Click on 'Next'. Select the desired language. Click on 'Next'.
  • Page 14: Starting Software

    You can start the software as follows: Click the software symbol on the desktop. In the task bar, click on 'Start' > 'Programs' > 'FX2060' > XX_xx_Version > 'FXS2061-O'. 2.4 Exiting software You can exit the software as follows: In the menu bar, click on 'File' > 'Exit'.
  • Page 15: Communication With Devices

    The interval for updating device data can be set and initiated from within the 'FXS2061-O Wireless Diagnostic Tool' software. Updating can take up to two hours depending on the complexity of the radio cell.
  • Page 16 Installation Communication with devices Variants Device Connection Gateway Task card: 'Diagnostic function' Direct radio FDOOT271-O The 'MCL-USB adapter (radio)' is in connection between FDM273-O radio range of the device 'MCL-USB adapter FDM275-O <10 m). (radio)' and the Various diagnostics functions are devices supported.
  • Page 17: Connection Between Device And Pc

    The software is installed on the PC. See the chapter 'Installing software 11]'. The devices' power supply must be ensured for the duration of the connection. The 'FXS2061-O Wireless Diagnostic Tool software must be restarted if an interruption occurs. The PC has a USB port type A.
  • Page 18 1. Close the software in the 'File' main menu with the 'Exit' command. 2. Remove all connection cables. 3. Close the open housing on the radio gateway. The connection with the 'FXS2061-O Wireless Diagnostic Tool' software is disconnected. See also...
  • Page 19: Gui

    Overview of the program window 3 GUI 3.1 Overview of the program window Figure 2: Program window 1 Title bar 9 Selected tab 2 Menu bar 10 Field for information about and commands for the selected tab 3 Toolbar The data applies to the device selected in position (8) or (5).
  • Page 20: Menu Bar

    Menu bar 3.2 Menu bar The menu structure and menu items are fixed for each task card. Individual menu items may be shaded out depending on the task card selected. Menu items that can not be run are shaded gray. Figure 3: Bar with the main menus for the 'Network' task card Figure 4: Bar with the main menus for the 'Diagnostic function' task card The following main menus exist:...
  • Page 21 Menu bar Main menu Submenu Action Discover Gateways ... Searches for the radio gateway connected by cable or the active Network radio gateways within range. Get gateway device list Loads the devices for the radio gateway. or <Ctrl> + <L> Get connectivity state Checks the radio cell connections.
  • Page 22 Menu bar Main menu Submenu Action Check The device test is triggered. Diagnostic or <CTR+2> and <1> Check + alarm The device and alarm tests are triggered. or <CTR+2> and <2> Check + test alarm The device and test alarm tests are triggered. or <CTR+2>...
  • Page 23 About Displays detailed information about the 'FXS2061-O Wireless Diagnostic Tool' software. This function is not supported by all fire control panels. An additional activation at the control panel may be required. Please observe the relevant information in the documentation for your fire control panel.
  • Page 24: Shortcuts

    Menu bar 3.2.1 Shortcuts You can obtain an overview of the available keyboard shortcuts via 'Help' > 'Show shortcuts' or by pressing <Ctrl> + <Shift> + <L>. The following keyboard shortcuts are possible when using the 'Network' task card: Command Shortcut Change user role <Ctrl>...
  • Page 25 Menu bar The following keyboard shortcuts are possible when using the 'Diagnostic function' task card: Command Shortcut Alarm <Ctrl> +< 2, 4> Change user role <Ctrl> + <U> Check <Ctrl> + <2, 1> Check + alarm <Ctrl> + <2, 2> Check + test alarm <Ctrl>...
  • Page 26: Toolbar

    Toolbar 3.3 Toolbar The commands on the toolbar enable the following functions: The connection to ' Network' or to ' Diagnostic function' Exchange of data with the ' Network' or ' Diagnostic function' Only those commands that correspond to the selected task card are displayed on the toolbar.
  • Page 27: Network' Task Card

    You can use the ' Network' task card to carry out reading and configuring directly on the radio gateway. The 'FXS2061-O Wireless Diagnostic Tool' software is in direct contact with the radio gateway and can access the current radio gateway data and its data collection from the devices. You can tell the age of the data from the data collection.
  • Page 28: Gateway Device List

    'Network' task card 3.5.1 Gateway device list Figure 8: Gateway device list All devices in the selected gateway are displayed. Live data is displayed with the appendage 'Live'. Indication Action Address Displays the address of the device. Device type name Shows the device type as a symbol and the device designation.
  • Page 29: Table Of Neighboring Devices

    'Network' task card 3.5.2 Table of neighboring devices Every device saves its connections to other devices in the neighboring devices table. For every connection between two devices, the required transmitting power is determined by means of the 'RSSI' received field strength. The higher the transmitting power required, the higher the level of energy required and the shorter the service life of the battery.
  • Page 30: Commands

    'Network' task card 3.5.3 Commands The fields are only active when a device is selected. Figure 10: Network commands Indication Action Commanding The following commands can be selected for the radio gateway in the selection window: Get meeting channel number Auto refresh interval of data collection Trigger data collection Factory Reset...
  • Page 31: Diagnostic Function' Task Card

    'Diagnostic function' task card 3.6 'Diagnostic function' task card You can use the ' Diagnostic function' task card to directly read and configure devices located in range of the MCL-USB adapter (radio) FDUZ227. Figure 11: 'Diagnostic function' task card Indication Action Diagnostic function List of diagnostic networks...
  • Page 32: Gateway Device List

    'Diagnostic function' task card 3.6.1 Gateway device list Figure 12: Gateway device list All devices in the selected gateway are displayed. Live data is displayed with the appendage 'Live'. Indication Action Address Displays the address of the device. Device type name Shows the device type as a symbol and the device designation.
  • Page 33: Quick Access

    'Diagnostic function' task card 3.6.2 Quick access Figure 13: Quick access Indication Action Quick function access Shortcut with known function numbers Function code Entry of a known function number Execute function The selected command is executed. 3.6.3 Test diagnostics Figure 14: Test diagnosis Indication Action Selection window...
  • Page 34: Commissioning

    'Diagnostic function' task card 3.6.4 Commissioning Figure 15: Commissioning Indication Action Selection window The following are available for selection in the selection window: Device information Parameter Position Execute command The selected command is executed. Return value The results of the executed command are displayed. 34 | 64 Building Technologies A6V10425605_b_en_--...
  • Page 35: Neighboring Devices Table

    'Diagnostic function' task card 3.6.5 Neighboring devices table Every device saves its connections to other devices in the neighboring devices table. For every connection between two devices, the required transmitting power is determined by means of the 'RSSI' received field strength. The higher the transmitting power required, the higher the level of energy required and the shorter the service life of the battery.
  • Page 36: Commands

    'Diagnostic function' task card 3.6.6 Commands The fields are only active when a device is selected. Figure 17: Commanding Indication Action Commanding The following commands can be selected for the radio gateway in the selection window: Get meeting channel number Auto refresh interval of data collection Trigger data collection Factory Reset...
  • Page 37: Battery Indicator

    Battery indicator 3.7 Battery indicator The charge state is displayed in five levels. When the battery is connected, the indicator is activated and is always set automatically to 100 %. This also applies to partially empty batteries. Example: A battery with a service life of four years displays a charge state of 50 % after two years of use.
  • Page 38: Setting The Danger Level

    Setting the danger level 3.8 Setting the danger level The danger level can be set individually for each of the four inputs. The control panel only evaluates 'Input 1:' for the following devices: FDOOT271-O FDM273-O FDM275-O Figure 19: Setting the danger level 3.9 Help 'Help' can only be opened if ActiveX controls are enabled in your browser.
  • Page 39: Operation

    Operation Pre-settings 4 Operation To enable the 'FXS2061-O Wireless Diagnostic Tool' software to communicate with devices, the PC must be connected to the MCL-USB adapter (radio) FDUZ227. The adapter establishes the radio connection to the devices. With the radio gateway, a faster connection can be established using a cable as an alternative.
  • Page 40: Configuration

    Operation Pre-settings 4.1.1 Configuration Changes to Configurations only become active after a new connection is established. Figure 20: Configurations Field Action Configurations path Memory location of the configuration path Browse... Search for memory location Restore defaults Restore default settings &Apply Adopt changed settings Confirm change Cancel...
  • Page 41: Presettings For Dsv

    Operation Pre-settings 4.1.2 Presettings for DSV Changes to DSV only become active after a new connection is established. Figure 21: Presettings for DSV Field Action DSV path: Memory location of the DSV Browse... Search for memory location Restore defaults Restore default settings &Apply Adopt changed settings Confirm change...
  • Page 42: Device

    Displays the serial interfaces available and an interface selection for FDUZ227. The appropriate interface is displayed in the device manager of the PC as a connection (COM & LPT) with the name 'Siemens FDUZ227 Device'. Restore defaults Restore default settings &Apply...
  • Page 43: Firmware Package Presettings

    Operation Pre-settings 4.1.4 Firmware package presettings Figure 23: Presettings for firmware package Field Action Firmware package path(s) Memory location of the firmware package and preferences Browse... Search for memory location Restore defaults Restore default settings &Apply Adopt changed settings Confirm change Cancel Cancel process 43 | 64...
  • Page 44: General Settings

    4.1.5 General settings A change of language only takes effect once the 'FXS2061-O Wireless Diagnostic Tool' software is restarted. The units cannot be changed. Figure 24: Presettings for FXS2061-O Wireless Diagnostic Tool 44 | 64 Building Technologies A6V10425605_b_en_-- Fire System...
  • Page 45 Selects automatic updating of the device list if connected to Gateway by wire. Clear tools internal storage The values saved in the 'FXS2061-O Wireless Diagnostic Tool' software are deleted. Restart Tool 'FXS2061-O Wireless Diagnostic Tool' is restarted in order to activate changes to the language and units.
  • Page 46: Help Settings

    Cancel Cancel process 4.2 'Discover Gateways...' button If you click on the 'Discover Gateways ...', the FXS2061-O Wireless Diagnostic Tool searches for wireless devices in range and establishes a connection to them. The devices are displayed in the network structure.
  • Page 47: Reports And Customer Texts

    Reports and customer texts 4.4 Reports and customer texts 4.4.1 Reading out information The 'FXS2061-O Wireless Diagnostic Tool' software can read information from the wireless components. Reading out directly Reading out can take place directly on the device via radio.
  • Page 48: Customer Texts

    Multiple mapping files can be imported into the 'FXS2061-O Wireless Diagnostic Tool' software. All imported files are saved in an internal mapping memory. They are read every time the 'FXS2061-O Wireless Diagnostic Tool' starts up. There is no need to reimport mapping files when starting the software.
  • Page 49: Report Settings

    Operation Reports and customer texts 4.4.4 Report settings Figure 26: Report settings Main menu Submenu Action Report type Quality Report Displays the quality of the connections of the radio gateway and the individual devices. Connectivity Report Displays the quality of the connections of the radio gateway and the individual devices.
  • Page 50 Operation Reports and customer texts Quality report 50 | 64 Building Technologies A6V10425605_b_en_-- Fire System 2016-12-12...
  • Page 51 Operation Reports and customer texts Connection report 51 | 64 A6V10425605_b_en_-- Building Technologies Fire System 2016-12-12...
  • Page 52 Operation Reports and customer texts Extended connection report 52 | 64 Building Technologies A6V10425605_b_en_-- Fire System 2016-12-12...
  • Page 53: Reading The Report

    Operation Reports and customer texts 4.4.5 Reading the report The report contains the real data at the time of recording by the radio gateway. Due to the dynamic performance of the radio system, the system adapts to changes automatically. Consequently, the current data may differ from that actually stored.
  • Page 54: Interpreting The Report

    Operation Reports and customer texts Term Explanation Recent RSSI [dBm] The selected device currently receives with the specified received field strengths from neighboring devices. Transmission power Displays the transmitting power of this device in levels from low (1) to maximum (10).
  • Page 55: Replacing The Radio Gateway

    Follow the instructions in the documentation for your fire control panel. 1. Switch the detector line off. 2. Remove the cable connection to the detector line on the radio gateway. 3. Using the 'FXS2061-O Wireless Diagnostic Tool' software, select the relevant radio gateway in the main menu 'Network'.
  • Page 56 Operation Replacing the radio gateway Only confirm with 'OK' once you have switched gateways. 1. Switch gateways by connecting the 3.5 mm jack cable to the new gateway. 2. Confirm the successful data transfer with 'OK'. 3. The new radio gateway automatically has the net ID of the old radio gateway. 4.
  • Page 57: Updating The Firmware Of The Radio Gateway

    Updating the firmware of the radio gateway 4.6 Updating the firmware of the radio gateway Only software packages created by Siemens are affected by the firmware update. The following steps do not update the processor for line activation in the radio gateway! The firmware update is in a ZIP file.
  • Page 58 Operation Updating the firmware of the radio gateway 4. Under 'Devices', select the device to be updated from the drop-down list. 5. Under 'Firmware packages', select the firmware package to be installed from the drop-down list. 6. Under 'Firmware versions', select the firmware version to be installed from the drop-down list.
  • Page 59 Operation Updating the firmware of the radio gateway 7. Wait until the firmware has updated and the data has been imported to the radio gateway. 8. Click on 'Finish' to complete the firmware update. The window closes. The radio gateway firmware is updated. 59 | 64 A6V10425605_b_en_-- Building Technologies...
  • Page 60: Updating The Firmware Of Mcl-Usb Adapter (Radio) Fduz227

    Operation Updating the firmware of MCL-USB adapter (radio) FDUZ227 4.7 Updating the firmware of MCL-USB adapter (radio) FDUZ227 The firmware update is in a ZIP file. The DSV file version and the firmware version must be compatible. The MCL-USB adapter (radio) FDUZ227 is connected to the PC via a USB cable.
  • Page 61 Operation Updating the firmware of MCL-USB adapter (radio) FDUZ227 4. Under 'Devices', select the device to be updated from the drop-down list. 5. Under 'Firmware packages', select the firmware package to be installed from the drop-down list. 6. Under 'Firmware versions', select the firmware version to be installed from the drop-down list.
  • Page 62 Operation Updating the firmware of MCL-USB adapter (radio) FDUZ227 7. Wait until the firmware has updated and the data has been imported to the radio gateway. 8. Click on 'Finish' to complete the firmware update. The window closes. The MCL-USB adapter (radio) FDUZ227 firmware is updated.
  • Page 63: Index

    Index / Index Original language ..........5 Battery indicator ..........37 Querying live data ........... 47 Connection Disconnecting ..........18 Connection cable ..........17 Radio gateway csv file Firmware update ........57, 60 Customer texts..........48 Replacing the radio gateway ......55 Customer texts Reading out the memory ........
  • Page 64 Issued by © Siemens Switzerland Ltd, 2015 Siemens Switzerland Ltd Technical specifications and availability subject to change without notice. Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug +41 41-724 24 24 www.siemens.com/buildingtechnologies Document ID: A6V10425605_b_en_-- Manual FD20/FD720 Edition: 2016-12-12...