Installing Software - Siemens FXS2061-O User Manual

2.2 Installing software

Building Technologies
Fire System
The 'FXS2061-O Wireless Diagnostic Tool' is available for installation.
1. Run the installation file.
The installation routine starts and guides you through the installation.
2. Follow the instructions of the installation routine and observe the installation
paths.
Installation paths
During installation, you can change the standard installation paths offered.
You can change various paths subsequently within the software, but you must
then move the respective directories manually to the new location.
We do not recommend that you change the program path after successful
installation in the software.
You can change the following standard installation paths during installation:
Target directory:
C:\Program Files\......"VersionID"
Common data directory:
For Win7: C:\ Program Data\......"VersionID"
For WinXP: C:\ Documents and Settings\All Users\
Application Data\......"VersionID"
"VersionID" = Name and version of the software
1
If you install a version of the software with another major or minor version, new
standard installation paths are created. The existing installation paths are
retained. If you already have an older version of
'FXS2061-O Wireless Diagnostic Tool' installed, this is uninstalled before the new
installation starts.
Installing software
1
1
1
Installation
2
11 | 64
A6V10425605_b_en_--
2016-12-12