Commands - Siemens FXS2061-O User Manual

GUI
3
'Diagnostic function' task card

3.6.6 Commands

Indication
Commanding
Command
parameters
Execute command
History of commands Displays the executed commands that have been recorded
Clear all history
Time stamp
Device
Command
Parameter
Return value
Re-Execute in
currently selected
device
36 | 64
Building Technologies
Fire System
The fields are only active when a device is selected.
Figure 17: Commanding
Action
The following commands can be selected for the radio gateway in
the selection window:
Get meeting channel number
Auto refresh interval of data collection
Trigger data collection
Factory Reset
The following commands can be selected for devices in the
selection window:
Get meeting channel number
Get max hop count
Factory Reset
Displays the selection of the intervals for data collection.
The selected command is executed.
The recorded commands are deleted.
The current time set on the connected PC is displayed.
Device designation
The executed command is displayed.
Device parameters
The results of the executed command are displayed.
The
device currently selected.
symbol is used to execute the command again on the
A6V10425605_b_en_--
2016-12-12