Commands - Siemens FXS2061-O User Manual

GUI
3
'Network' task card

3.5.3 Commands

30 | 64
Building Technologies
Fire System
The fields are only active when a device is selected.
Figure 10: Network commands
Indication Action
Commanding The following commands can be selected for the radio
gateway in the selection window:
The following commands can be selected for devices in the
selection window:
Command Displays the selection of the intervals for data collection.
parameters
Execute command The selected command is executed.
Displays the executed commands that have been recorded
History of
commands
Clear all history The recorded commands are deleted.
Time stamp The current time set on the connected PC is displayed.
Device Device designation
Device ID Displays the device ID
Command The executed command is displayed.
Parameter Device parameters
Return value Return value of the executed function
Re-Execute in
The
currently selected
device
the device currently selected.
Get meeting channel number
Auto refresh interval of data collection
Trigger data collection
Factory Reset
Get meeting channel number
Get max hop count
Factory Reset
symbol is used to execute the command again on
A6V10425605_b_en_--
2016-12-12