Interpreting The Report - Siemens FXS2061-O User Manual

Operation
4
Reports and customer texts
Term
Recent RSSI [dBm]
Transmission power
Channel
Neighbour rating
Some systems do not support customer texts. Please refer to the documentation for your fire detection
1
system.

4.4.6 Interpreting the report

54 | 64
Building Technologies
Fire System
Explanation
The selected device currently receives with the specified received field strengths
from neighboring devices.
Displays the transmitting power of this device in levels from low (1) to maximum
(10).
The device in this row sends to the selected device on this channel.
In the 868 MHz band, the address is lower than 100.
In the 433 MHz band, the address is higher than 100.
Primary: This is an important connection for monitoring the presence of the
device.
Secondary: This is a less important connection to the device.
The report provides information about the radio cell data. You can evaluate the
data in the report to assess the quality of the radio cell.
Requirements for assessment:
Data is available for all devices.
Take the age of the data into account and update the data if in doubt.
Take into account any pending changes from the customer, e.g., structural
alterations, as well as the current situation.
Good radio cell
Each device has as many neighboring devices as possible with a connection to
the radio gateway (high network density).
The transmitting power is low and the power consumption is, therefore, also
low.
RSSI is at a similar level for all devices.
Radio cell with increased risk of failure
The connection status is
radio gateway.
The transmitting power of a device is high.
The RSSI of a primary device is below -80 dBm.
yellow and the device only has one path to the
A6V10425605_b_en_--
2016-12-12