Storage; Cooking Time Tables - Profi Cook PC-DDK 1076 Instruction Manual

WarNING:
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CaUTION:
• Do not use a wire brush or any abrasive
items.
• Do not use any acidic or abrasive detergents.
• The individual parts are not dishwasher-safe.
Always clean the appliance and accessories after
use.
1. Remove the insert pot and accessories.
2. Always clean the inside and outside of the
housing with a damp dishcloth.
3. Pull the condensation collector down to empty
and clean it. After drying, slide it up again onto
the housing until it clicks into place.
4. Clean the insert pot and accessories in a bowl
of hot water. To help remove stubborn dirt, you
can use a nylon brush.
5. Then dry everything off.
Lid
1. Pull off the pressure regulator (1) by turning it.
Clean it under running water.
2. Remove the sealing ring (4) from the inside of
the lid. Clean it in a bowl of warm water. Rinse
and dry thoroughly.
3. Pull off the cover of the pressure regulator
valve (5). Check that the valve is not blocked by
holding it against the light. If necessary, remove
food residues with a toothpick. Clean the cover
under water with a nylon brush and then dry it.
4. Clean the lid with a sponge and detergent
under running hot water. Wipe it dry.
5. Check the mobility of the float valve (2): Hold
the lid horizontally with the float valve facing
upwards. The float valve must be easily pushed
in without resistance.
28
6. Check the sealing ring for damage. There must
be no cracking. If the sealing ring is damaged,
do not use the appliance! Replace it only with
an original replacement seal ring available from
your dealer.
Insert the sealing ring again by pressing it on
the inner rim of the lid under the metal ring. The
metal ring must be positioned in the groove of
the sealing ring. If the sealing ring is incorrectly
positioned, the appliance will not function.
7. Fit the cover back onto the pressure regulator
valve.
8. Fit the pressure regulator back onto the valve.
replacement Seal rings
can be ordered from your dealer. (Spare part no.:
8910760)

Storage

• Clean the device as described. Let the acces-
sories dry completely.
• Place the lid onto the pressure cooker with the
inside facing upwards. This protects the valves
and regulator on the top of the lid. If the appli-
ance is stored with the lid closed, stale smells
may build up.
• We recommend that you store the device in its
original packaging when it is not to be used for
a longer period.
• Always store the device at a well ventilated and
dry place outside the reach of children.

Cooking Time Tables

These tables offer you additional information that
can help you with the individual preparation of your
meals.