Problems With The Appliance; Cleaning - Profi Cook PC-DDK 1076 Instruction Manual

4. If you want to cancel the time delay early,
press the button KEEP WarM / CaNCEL.
The cooking process starts immediately.
KEEP WarM - Keep Warm
With this function, you can keep the cooked food
warm for a long period.
1. Add the cooked food to the insert pot.
2. Close the appliance with the lid.
3. Turn the pressure regulator to the STEAM
position.
4. Press the button repeatedly, until the symbol
in the display flashes.
Problem
The appliance does not work.
Steam escapes at the rim of the lid.
The lid cannot be opened after cooking. The pressure in the pot is not yet fully released.
WarNING:
• Before cleaning, switch the device off and pull the power plug.
• Allow the appliance with insert pot to cool.
5. Press the button KEEP WarM / CaNCEL.
The LED WarM lights up. The display shows
"0:0 0".
6. The appliance ends the keep-warm phase au-
tomatically after 4 hours. You will hear 5 beeps.
The display shows "
Ending Operation
1. Press the . button. The display shows
"
2. Disconnect the power cord from the socket.

Problems with the appliance

Cause / remedy
The appliance has no power supply.
• Check whether the power cord is properly plugged into the
appliance.
• Is the power cord connected to the mains socket?
• Check the socket with another appliance.
• Check the main fuse.
If the appliance is defective, contact our customer service or a
specialist.
Ensure that,
• the pressure cooker has been properly sealed;
• the sealing ring is in a defect-free, clean condition and has
been inserted correctly in the lid.
See also the chapter on "Cleaning".
• Proceed as described under "Instructions for Use"  "Open-
ing the Lid".

Cleaning

".
".
27