Intotf; Mounting And Dismounting The User Position - Life Fitness INTEGRITY Club + Series Assembly Instructions Manual

INTOTF

Item
1
2
3
4
5
Mounting and Dismounting the Treadmill
Use the handrails to enhance stability when mounting or dismounting a treadmill. Never mount or dismount the
treadmill while the running belt is moving. Use the STOP button on the console to end a workout and stop the running
belt. Use the Emergency Stop System to stop the belt immediately.
User Position
The width of the moving walking/running surface is 22 in. (55 cm). Users must keep their feet within this width while in
motion. If standing on the stationary side rails, a user should ensure that his/her feet are completely on the non-
moving portion. Never step partially on the moving surface and partially on the non-moving surface simultaneously.
• Users can adjust their fore-aft position on the moving belt as desired for reach to the console and handles,
clearance for arm swing and attachment of the safety stop pull cord. Do not step on the rear roller.
• It is recommended that the user run within the length of the side handrails to allow usage of the side arms to
dismount the belt if needed.
Description
Console
Cup Holder
Walking Belt
Emergency Stop Lanyard
Emergency Stop Magnet
Page 14 of 40
Qty.
1
2
1
1
1