Before Putting The Machine Into Operation - P.Lindberg 9060752 Original Manual

Very important – ensure that the wire to the emergency stop and the safety
contact bar is mounted correctly! If the emergency stop does not work, this
could cause death or severe injury. See also the photos on page 13 and 14.
Always check the function of the emergency stop prior to use of the

Before putting the machine into operation:

A. The user must be fully trained in how to use the woodchipper before it is put into
operation.
B. The user must read and understand the manual.
C. The machine must stand on a flat surface and all shields must be attached and in
good, reliable working condition.
D. The blades must be in good condition and be positioned correctly. Sharpen all blades
and mount them in sets.
E. All joints must be inspected and tightened if necessary.
F. Do not insert any material other than wood into the woodchipper. Remove all nails
and screws.
G. Have fire-fighting equipment ready at the work location.
P. Lindberg A/S
Tel.: +45 7021 2626
woodchipper.
5
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9060752 EN V3
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk