Before Putting The Machine Into Operation - P.Lindberg 90 54 661 Original Manual

Very important – ensure that the wire to the emergency stop / safety bar is
mounted correctly! If the emergency stop does not work, this could cause death
or severe injury. See also the photo on page 13.

Before putting the machine into operation:

A. The user must be fully trained in how to use the woodchipper before it is put into
operation.
B. The user must read and understand the manual.
C. The machine must stand on a flat surface and all shields must be attached and in
good, reliable working condition.
D. The blades must be in good condition and be positioned correctly. Sharpen all blades
and mount them in sets.
E. All joints must be inspected and tightened if necessary.
F. Do not insert any material other than wood into the woodchipper. Remove all nails
and screws.
G. Have fire-fighting equipment ready at the work location.
P. Lindberg A/S
Tel.: +45 7021 2626
4
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9054661 EN V3
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk