Maintenance; Maintenance Plan; Lubrication - P.Lindberg 9060752 Original Manual

Maintenance

Regular maintenance is required to ensure the equipment's best performance and
long service life.
WARNING – Before any type of maintenance or inspection is carried out, stop
the engine and wait 5 minutes until all parts have cooled off. Detach the spark plug
cable and keep it away from the spark plug.

Maintenance plan:

Work flow
Check engine oil
Check the general
condition of the
equipment
Check the sharpness of
the blades
Check the belts
Check tyre pressure
Clean the engine's
exterior and radiator
Change motor oil
Replace the air filter
Replace the spark plug

Lubrication:

NOTE – All the woodchipper's bearings are sealed units and with normal use
they should sufficiently lubricated for the entire service life of the machine.
P. Lindberg A/S
Tel.: +45 7021 2626
Before each Every 25
use hours
Δ
Δ
Δ
Δ
Δ
Δ
First time Δ
after 5 hours
Δ
18
Sdr. Ringvej 1
DK-6600 Vejen
Every
100
hours
Δ
e-mail: salg@p-lindberg.dk
MAN 9060752 EN V3
www.p-lindberg.dk