Advertisement
AK-UI55 Info
Lights up in event of:
Energy optimization
Cooling
Defrosting
Fan operation
The display can give the following messages:
-d-
Err
Fan
OFF
OFF
SEr
CO2
AK-UI55 Bluetooth
Access to parameters via Bluetooth and app
1. App can be downloaded from Google App Store and Google Play
Name = AK-CC55 Connect
Start the app.
2. Click on the display's Bluetooth button for 3 seconds.
The Bluetooth light will then flash while display is showing the
controller's address.
3. Connect to the controller from the app.
2 | AN294434115977en-000202b
Defrost is in progress
The temperature cannot be displayed due to a sensor error
Appliance cleaning has been initiated. The fans are running
Appliance cleaning is activated and the appliance can be cleaned
The main switch is set to Off
The main switch is set to service / manual operation
Flashes: Will display in event of a refrigerant leakage alarm, but only if the refrigerant is set up for CO2
Lights up in event of:
Alarm
With start-up /connection to a controller,
the display will "light up in circles" as it col-
lects data from the controller.
Without configuration, the display
can show the same information as
shown above.
Loc
The operation is locked and cannot
be operated via Bluetooth.
Unlock from the system device.
Functions:
See the respective controller's User Guide.
© Danfoss | DCS (vt) | 2019.09
Advertisement
