Advertisement
Quick Links
Installation Guide
AK-UI55 Bluetooth
Identification
Mounting
Connection
AK-UI55 Bluetooth
Access to parameters via Bluetooth and app
1. App can be downloaded from App Store and Google Play
Name = AK-CC55 Connect
Start the app.
App Store
2. Click on the display's Bluetooth button for 3 seconds.
The Bluetooth light will then flash while display is showing the controller's address.
3. Connect to the controller from the app.
© Danfoss | DCS (vt) | 2020.09
t
= 0 – 55 °C
amb
Non condensing
RJ 12
L
. = 100 m
MAX
Google Play
Dimensions
0.5 - 3.0 mm
32 – 130 °F
AK-UI cable, 3 m: 084B4078
AK-UI cable, 6 m: 084B4079
084R8057
AN324530821966en-000104
NEMA4
IP65
L
1
L
2
L
+ L
:
. = 100 m
MAX
1
2
Without configuration, the display
can show the same information as
the AK-UI55 Info version.
Loc
The operation is locked and cannot
be operated via Bluetooth.
Unlock from the system device.
AN324530821966en-000104 | 1
Advertisement
Related Manuals for Danfoss AK-UI55
Summary of Contents for Danfoss AK-UI55
- Page 1 2. Click on the display’s Bluetooth button for 3 seconds. The Bluetooth light will then flash while display is showing the controller’s address. 3. Connect to the controller from the app. © Danfoss | DCS (vt) | 2020.09 AN324530821966en-000104 | 1...
- Page 2 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Modifications: Any modifications made to this device that are not approved by Danfoss may void the authority granted to the user by the FCC to operate this equipment.