• Recall Memory
•
In measure mode in the parameter of interest, press key
The last saved data is shown on the display.
•
As indicated by the string
The number next to the M+ icon indicates the save slot.
•
Press
to return to measure mode.
Note: if during the data saving, the instrument is in error, this error will be displayed on the data recall phase
on the instrument
• Clear the saved data
To clear the data stored in the instrumental memory, access the CLEAR DATA P8.2 setup menu and
•
select YES.
IMPORTANT: Factory reset of the pH, ORP and Cond parameters does not delete the stored data
Instrument Setup menu
•
In measure mode, press key
•
Use the directional keys to move to SETTINGS P9.0 and access the menu by pressing the key
•
Move with the keys
The table below shows the setup menu structure for the general settings of the instrument; for each
program, there are the options that the user can choose and the default value:
• Composition of the setup menu for Setting menu
Program
P9.1
TEMPERATURE U.M.
P9.2
DATE AND TIME SET
P9.3
BACKLIGHT MODE
P9.4
BRIGHTNESS
P9.5
SLEEP MODE
P9.8
RESET
P9.9
AUTO POWER-OFF
P9.1 Unit of measurement for temperature
Access this setup menu to select the temperature unit to use:
, use the directional keys to scroll through the different stored values.
to access the SETUP menu.
and
to select the program to access.
Description
°C / °F
-
INDOOR – OUTDOOR-AUTOMATIC
LOW – MEDIUM - HIGH
OFF – 2 MIN – 5 MIN
YES - NO
YES – NO
to enter the RECALL MEMORY mode.
Options
25
.
Factory Default
Settings
°C
-
AUTOMATIC
MEDIUM
2 MIN
NO
NO