Table of Contents
Advertisement
Automatic start/stop of the data logger
In measure press
to start or stop automatic recording. When automatic data storage is running, the icon
flashes on the display. When set, but not in operation, the icon on the screen remains fixed. When the memory is
complete, recording stops automatically.
Note
: Entering the Setup menu stops recording. If recording takes place while there is a single channel
measurement on the display, data concerning only that channel will be saved. If recording takes place
while the display is showing the multiview screen, data concerning all channels available at the same
time will be saved.
Programmed logger - Setting the Programmed Data Logger
Set in order: start date (dd:mm:yy) - start time (hh:mm:ss) - end date (dd:mm:yy) - end time (hh:mm:ss) -
acquisition interval. Use the arrows
value.
Programmed Data Logger Start/Stop
A flashing
icon will appear in measurement. The instrument will start recording data independently once the
set date and time is reached and will stop.
Note
: If recording takes place while there is a single channel measurement on the display, data
concerning only that channel will be saved. If recording takes place while the display is showing the
multiview screen, data concerning all channels available at the same time will be saved.
• Memory
This menu shows the percentage of memory available, memory used and the number of saved data.
• Erase memory
Access this menu and select 'Yes' to delete saved data. At the end of deletion, the instrument returns to the
measurement screen.
Instrument Configuration Menu
TEMP:
Measurement Settings
LOG:
Data logger settings
SETTINGS:
General Instrument Settings
The table below shows the Setup menu structure for the parameter, for each programme the options the user can
choose and the default value:
Description
SCREEN SETTINGS
DATE AND TIME
UNIT OF MEASUREMENT
LANGUAGE
AUTO SWITCH-OFF
SOUND
PASSWORD
RESET SETTINGS
to change the flashing value. Press
Options
THEME COLOUR
Light theme - Dark theme
STANDBY
No - 30 sec - 1, 2, 5 minutes
BACKLIGHTING
Car - Indoor - Outdoor
BRIGHTNESS
Low - Normal - High
---
°C - °F
Ita - Eng - Fra - Deu - Esp
No - Yes, after 20 minutes
No - Alarm only - Yes
---
No - YES
13
to confirm and move to the next
Factory Settings
Clear theme
30 seconds
Cars
Normal
---
°C
Ita
No
No
---
No
UM Temp74 PT100 Vio EN rev.1 19.05.2023
Advertisement
Table of Contents
