Table of Contents
Advertisement
If liquids get into the housing, they could damage the instrument.
Do not open the instrument housing: it does not contain parts that can be maintained, repaired or replaced
by the user. In case of problems with the instrument, contact your local distributor.
It is recommended to use original spare parts only. Contact your local distributor for information. The use
of non-original spare parts can lead to malfunction or permanent damage to the instrument. Moreover, the
use of spare parts not guaranteed by the supplier can be dangerous for the user himself.
For the maintenance of the electrochemical sensors, refer to the documentation present in their packaging
or contact the supplier.
• Responsibility of the owner of the instrument
The person who owns and uses the tool or authorizes its use by other people is the owner of the tool and
is responsible for the safety of all users of the tool and third parties.
The owner of the instrument must inform users of the use of the same safely in their workplace and on the
management of potential risks, also providing the required protective devices.
When using chemicals or solvents, follow the manufacturer's safety data sheets.
Instrumental features
• Parameters
OXY 70 Vio: % O
• Datasheet
Dissolved
Measuring range
Resolution
Accuracy
Dissolved O
saturation measuring range
2
Resolution
Accuracy
Oxygen calibration points
Calibration points indication
Calibration report
Barometric pressure measuring range
Resolution
, mg/l, mbar, Temp
2
O
2
OXY 70 Vio (optical sensor)
0,00...19,99 mg/l / 20,0...50,0 mg/l - ppm
0,1 / 0,01
± 0,2 up to 10 mg/l-ppm
± 0,3 from 10 to 20 mg/l-ppm
± 5% in the range from 20 to 50 mg/l-ppm
0,0...199,9 % / 200...400%
0,1 / 1%
± 10%
1 or 2 automatic
Yes
Si
0...1100 mbar
1 mbar
8
Advertisement
Table of Contents
