Table of Contents
Advertisement
•
Press the key
• Setup Menu Structure
P5.0 DO SETTINGS
P8.0 LOG SETTINGS
P9.0 SETTINGS
Temperature measurement ATC – MTC
ATC : The direct measurement of the sample temperature for all parameters is carried out through the
•
NTC 30KΩ probe, integrated into the sensor.
MTC : If no temperature probe is connected, the value must be changed manually: keep pressed
•
or
until the value starts to flash; then adjust it by continuing to use the directional keys; press
to confirm.
Note: with the optical sensor supplied together with the instrument, the manual temperature
compensation (MTC) IS NOT TO BE PERFORMED.
to return to the previous menu.
P5.1
Cal 0
P5.2
Salt Compensation
P5.6
Cal Data
P5.7
Set Due Cal
P5.8
Reset Settings
P5.9
Temp Cal
P8.1
Data Logger Type
P8.2
Clear Data
P9.1
Temperature U.M.
P9.2
Time and data Set
P9.3
Backlight mode
P9.4
Brightness
P9.5
Sleep Mode
P9.8
Reset Settings
P9.9
Auto Power-Off
16
Advertisement
Table of Contents
