Store It Cold CoolBot Manual page 28

did on the front and back to remain constant around the perimeter of the cooler. Work your
way from front to back as you pull down tight and secure.
11. After the membrane has been correctly installed and secured to the sides of your cooler, you
can trim with a utility knife the excess fabric below the trim if desired. This will give a cleaner
and more professional look but it is not necessary.
12. Caulk with silicone the top edge of the trimming bars for added protection.
13. Your cooler is now set up for outdoor use.
A/C INSTALLATION INTRUCTIONS
This is a quick, simple guide to install your LG unit in your Cooler enclosure.
Please read the LG OWNER'S MANUAL supplied with your A/C unit to familiarize yourself with the
operation of your LG air conditioner unit.
1. Carefully unpack your A/C unit out of the box. Make sure the A/C unit remains in the correct
position. DO NOT stand the box or the A/C unit on the side, back or front. If the A/C unit was
stored on the side or upside down, please set the unit in the correct position and let the A/C
stand for a period of at least 24Hrs before installing.
2. DO NOT discard any of the contents inside the box.
2020 © Store It Cold, LLC.
SUPPORT@STOREITCOLD.COM
28 Rev 2020-8A. All Rights Reserved.