DOOR CAP - RAIN GUTTER (OUTDOOR UNITS ONLY)
For free-standing walk-ins where the door is exposed to the outside, a door cap to prevent rain
water from running down into the door gasket is provided. The cap should be attached with sheet
metal screws to the frame above the door at a slight angle to allow water to drain quickly towards
the hinged side of the door (see Fig. below).
Caulk the joint with sealant (butyl or silicone) between cap and wall to prevent leaks (See Fig.)
2020 © Store It Cold, LLC.
SUPPORT@STOREITCOLD.COM
24
Rev 2020-8A. All Rights Reserved.
Need help?
Do you have a question about the CoolBot and is the answer not in the manual?
Questions and answers