Idis DA-TM1100 Installation Manual

DA-TM1100 INSTALLATION MANUAL
Mounting
Mount the bracket to the wall as follows:
1
Insert cables from external devices, network and
power adapter to the sponge and bracket.
2
Mount bracket to the wall by using the provided
anchors and screws.
Connect your camera to the bracket as follows:
3
Screw the camera body onto bracket.
Bracket
Camera
body
This manual is intended for users of the DA-TM1100 wall mounting
bracket. It includes instructions for mounting the DA-TM1100 wall
mounting bracket to a wall.
Safety wire
This bracket is intended to be used with a specific
model of camera. Do not use it with other models of
cameras except for those approved by the dealer or
distributor.
This installation should be performed by a qualified
service personnel in conformance to all local codes.
You may need to reinforce the wall. If the wall is not
strong enough to support the camera, the camera
may fall.
Do not use this product for other purposes.
Bracket
Bracket
Camera
body
Wall Hole
Safety wire