Idis DA-WM3200 Installation Manual

DA-WM3200 INSTALLATION MANUAL
Mounting
1
Fasten the wall mount by using the M8
anchor bolts or nuts (not provided).
2
Adjust the camera angle by loosening the
tilt or pan adjustment nuts.
This manual is intended for users of the DA-WM3200 wall
mounting bracket. It includes instructions for mounting
the DA-WM3200 wall mounting bracket to a wall.
• This bracket is intended to be used with DC-
T62XX series model of camera. Do not use it with
other models of cameras.
• This installation should be performed by a
qualified service personnel in conformance to all
local codes.
• You may need to reinforce the wall. If the wall is
not strong enough to support the camera, the
camera may fall.
• Do not use this product for other purposes.
Pan Adjustment
Nut
Tilt Adjustment
Nuts (each 2ea)