Idis DA-TM4100 Installation Manual

DA-TM4100 INSTALLATION MANUAL
Mounting
Mount the bracket to the wall as follows:
1
Insert cables from external devices, network and
power adapter to the sponge and bracket.
2
Mount bracket to the wall by using the provided
anchors and screws.
Connect your camera to the bracket as follows:
3
Screw the camera body onto bracket.
Bracket
Camera
body
This manual is intended for users of the DA-TM4100 wall mounting
bracket. It includes instructions for mounting the DA-TM4100 wall
mounting bracket to a wall.
• This bracket is intended to be used with a specific
model of camera. Do not use it with other models of
cameras except for those approved by the dealer or
distributor.
• This installation should be performed by a qualified
service personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not
strong enough to support the camera, the camera
may fall.
• Do not use this product for other purposes.
Bracket
Wall Hole