Idis DA-WM1200 Installation Manual

DA-WM1200 INSTALLATION MANUAL
Mounting
Mount the bracket to the wall as follows:
1
Attach rubber 1 to bracket 1.
2
Insert cables from external devices, network and
power adapter through the hole in the rear of
bracket 1.
3
Mount bracket 1 to the wall by using the screws.
4
Attach rubber 2 onto bracket 2.
5
Screw bracket 2 to bracket 1.
This manual is intended for users of the DA-WM1200 wall mounting
bracket. It includes instructions for mounting the DA-WM1200 wall
mounting bracket to a wall.
• This bracket is intended to be used with DC-D series
model of camera. Do not use it with other models of
cameras.
• This installation should be performed by a qualified
service personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not
strong enough to support the camera, the camera may
fall.
• Do not use this product for other purposes.
Bracket 1 Rubber 1
Bracket 1
Cable
Rubber 1
Bracket 1
Rubber 2
Bracket 2