Idis DA-BH1100 Installation Manual

DA-BH1100 INSTALLATION MANUAL
Mounting
Connect your camera to the bracket as follows:
1
Screw the provided black plate onto the mount bracket of
the camera bottom.
2
Screw the plate in the bracket by using the provided
screws.
3
Connect the provided cable glands to the holes in the rear
of the bracket, and screw it by using the locknuts.
This manual is intended for users of the DA-BH1100 wall
mounting bracket. It includes instructions for mounting the
DA-BH1100 wall mounting bracket to a wall.
• This bracket is intended to be used with DC-B
series model of camera. Do not use it with other
models of cameras.
• This installation should be performed by a
qualified service personnel in conformance to all
local codes.
• You may need to reinforce the wall. If the wall is
not strong enough to support the camera, the
camera may fall.
• Do not use this product for other purposes.
Plate
Locknut Rubber
Cable Gland
Locknut Rubber
Mount Bracket
Plate
Mount Bracket
Cable Gland
Thread
Thread