Download
Share
Print this page
Tycon Power Systems TP-SW5G-MULTI User Manual
  1. Manuals
  2. Brands
  3. Tycon Power Systems Manuals
  4. Switch
  5. TP-SW5G-MULTI
  6. User manual

Tycon Power Systems TP-SW5G-MULTI User Manual

5 port poe switch
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
TP-SW5G-MULTI
5 port PoE Switch
TYCON POWER SYSTEMS

Advertisement

loading
Need help?

Need help?

Do you have a question about the TP-SW5G-MULTI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tycon Power Systems TP-SW5G-MULTI

Summary of Contents for Tycon Power Systems TP-SW5G-MULTI

  • Page 1 TP-SW5G-MULTI 5 port PoE Switch TYCON POWER SYSTEMS...

  • Page 2: General Information

    TYCON TP-SW5G-MULTI 1. General Information The PoE (Power Over Ethernet) Switch TP-SW5G-MULTI provide four 10M/100M/1000M TX ports with PoE PSE function plus one 10M/100M/1000M TX up-link port. It is a non-802.3af/at standard PoE device, deliver both Ethernet data and various PSE voltage (12~57VDC) through the traditional UTP or STP cable.
  • Page 3 User’s Manual TYCON TP-SW5G-MULTI *POWER LED STATUS Description Green LED ON when power input (DC IN on rear panel) has valid power supplied. LED ON when the following warning condition happens. *PoE under voltage (Vout<10V) *PoE over voltage (Vout>59V) *PoE over current (1A/per port) No power supplied.
  • Page 4 No power is delivering on this port. *Power wiring The TP-SW5G-MULTI allow the four various input voltage range from 12V to 57VDC, the terminal block on the rear panel used for input, it should be wired as detailed below, please make sure the input current is not over 10A.
  • Page 5 User’s Manual TYCON TP-SW5G-MULTI Port 2: * Data pair A on line 1 and 2 * Data pair B on line 3 and 6 * Data pair C plus VI+ on line 4 and 5 * Data pair D plus VI2- on line 7 and 8...
  • Page 6 User’s Manual TYCON TP-SW5G-MULTI Pin 4 Pin 4 Pin 5 Pin 5 Pin 7 Pin 7 Pin 8 Pin 8 Cross-over Cabling Pin 1 Pin 3 Pin 2 Pin 6 Pin 3 Pin 1 Pin 6 Pin 2 Pin 4...
  • Page 7 User’s Manual TYCON TP-SW5G-MULTI Alternative A Alternative A Alternative B Conductor (MDI-X) (MDI) (All) Negative Vport Positive Vport Negative Vport Positive Vport Positive Vport Negative port Positive Vport Positive Vport Positive Vport NegativeVport Negative Vport Negative Vport Be sure the twisted pair cable is bound with the standard RJ-45 pin, especially the pins 4, 5, 7 and 8. If the RJ-45 is bound with the wrong pin number, the PoE switch will force power the PD and damage the PD.

  • Page 8: Technical Specifications

    User’s Manual TYCON TP-SW5G-MULTI 3. Technical Specifications Standards IEEE802.3/IEEE802.3u standards/IEEE802.3ab (10 base-T/100base-TX/1000base-T) Ports 5 ports Ethernet switch support auto-crossover & auto-polarity P1~P4 with 12~57V PoE output Transmission speed 1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T) Auto-negotiation Switch technology store-and-forward Protocols CSMA/CD Flow control IEEE802.3x (full-duplex), back pressure (half-duplex)
  • Page 9 User’s Manual TYCON TP-SW5G-MULTI Yellow/Yellow Blinking @10M/100Mbps) *PoE (Yellow) port 1-4 ON - powering *POWER Green-normal, Red-alarm Power input 4 various 12V~57VDC input on rear terminal block Power consumption less than 5W when without PD loading Operating temperature -20℃~ +75℃...