Installation & Mounting Guide - Kurt PF Series Operating Instructions Manual

INSTALLATION & MOUNTING
All of the vises in the PF Series can be mounted with 1/2 inch SHCS using
the counter-bored through holes in the center of the rails of the vise.
Additional hole locations are shown below.
2X
52mm
2X
3.125
52mm
2.000 2.000
2X DRILLED & C'BORED
Ø0.500 0.500
FOR 1/2" SHCS
2X KURT STANDARD
PULL STUD HOLES
Ø12MM PULL STUD
M8 X 1.25 THREADS (4X)
INSTALLATION & MOUNTING GUIDE
4